Routine Maintenance; Cleaning The Appliance - Haier CFL Serie Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
English

7. ROUTINE MAINTENANCE

IN OX

Cleaning the appliance

Disconnect the electrical power supply before starting
the job.
Internal cleaning
Clean all internal parts with tepid water and neutral soap, vinegar
or sodium bicarbonate, then dry accurately. Alternatively use
detergents made specifically for the refrigerator, on sale in any
supermarket.
detergents, or solvents which could damage the finish.
To facilitate cleaning, the internal accessories can be removed
(consult parag. "Dismantling components").
External cleaning
Clean all external parts with specific detergents. Do not use
or solvents which could damage the finish.
Dismantling components
To facilitate cleaning operations, all the internal components
of the appliance can be dismantled. Follow the instructions in
the relevant figure.
A:
Freezer drawers, fruit/vegetable drawer and "Fresh Control
0°C drawer": these drawers slide on special guides with stops,
which prevent the drawers coming out entirely when opened,
and risk falling on the floor. If you wish to take them out of the
appliance for the cleaning operations, extract them to up to
¾ of their depth, lift them up slightly and continue extracting,
keeping them inclined upwards.
B:
Door balconies: they are simply fitted on the guides integrated
on the door. To remove them, lift them upward, firmly pushing
them up.
C:
Top in glass with bottle holder: the top slides on guides,
and has two pins preventing the guides from coming out
accidentally(see detail Ë); if you wish to remove it from the
appliance for the cleaning operations ,lift it up slightly and
extract it, keeping it inclined upwards.
D:
Glass top in two pieces: the front top (D2) is connected to
the rear top to prevent the latter coming out accidentally
(see detail.Í); to remove it, slightly lift the rear top (D1) and
withdraw the front top (D2).
The rear top (D1) is restrained at its ends by two pins which
prevent it coming out accidentally (see detail Ï). To extract
it, lift it upward and pull it toward yourself until you withdraw
it. When you re-position the two tops (D1 and D2) make sure
you connect them once again to each other.
E:
Glass top: the top slides on guides. If you wish to remove it
from the appliance for cleaning operations, take away the
"Fresh Control 0°C" drawer, slightly lift up the top and extract
it, continuing to hold it inclined upwards.
3
D1
D1
C
E
1
15
B
A
A
2
D2
D1
D2
D3

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido