Descargar Imprimir esta página

Technical Specifications - Hudora 65424 Instrucciones De Montaje

Ocultar thumbs Ver también para 65424:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
insTrucTions on assemBly and use
EN
congraTulaTions on PurcHasing THis ProducT!
Please read these instructions carefully. The instructions are an integral com-
ponent of the product. Therefore, please store them and the packaging carefully
in case questions arise in the future. Please always include these instructions
when handing on the product to a third party. This product must be assembled
by an adult. This product is not designed for industrial use. The use of the pro-
duct requires certain capabilities and skills. Always adjust according to the age
of the user and use for the purpose it has been designed for.

TecHnical sPecificaTions

Item:
Item number:
Weight:
Maximum carrying capacity:
Aim:
Trampoline for carrying out athletic bouncing and low jumps to improve physical
fitness levels.
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/.
safeTy informaTion
This description will help you to assemble and use the trampoline safely as well
as to store it properly.
• The trampoline must be used only on level, firm ground. If you are exercising
in interior rooms, make sure that you have ample space around you so that
you will not bump into furnishings while exercising. In particular, make sure
that you have sufficient clearance to the ceiling or lamps. Insufficient clea-
rance may result in dangerous head injuries.
• The trampoline may be used anywhere as long as it is placed on a level sur-
face and the room is high enough. Make sure that no angular or sharp objects
are in the vicinity of the trampoline.
• It is important to have adequate light when you are using the trampoline so
that you can easily see the middle of the mat. Do not jump on the suspension
element.
• Always jump in the middle of the mat.
• Your trampoline's base feet are equipped with non-slip rubber feet. Like any
rubber material, the feet may leave marks. It is therefore wise to place a
protective covering on floors susceptible to damage from such marks.
• Make sure that the trampoline is in technically perfect condition. Do not use
it if you notice any defects. See to it that defective parts are repaired imme-
diately. Do not modify the trampoline technically in any way.
• Warning! This fitness trampoline is not a toy. Children should always be su-
pervised by an adult when using the trampoline.
• The trampoline should only be used by one person at a time.
• Maximum user weight has been mentioned in the Technical Specifications.
• It is advisable to be barefoot when using the trampoline. We recommend that
you avoid wearing socks because they might cause you to slip on the mat
surface. If you prefer to wear shoes, they should have soft rubber and should
not have heels. Make sure that the shoes have no sharp edges or points that
might damage the mat.
• Caution! Under no circumstances should high-jumping exercises, somer-
saults or other acrobatic feats be performed on the trampoline. Never jump
off the trampoline onto the ground!
• Never place the trampoline on a concrete floor. Place mattresses and blan-
kets around the trampoline, in order to cushion a possible fall, in case the
floor is too hard.
• Ensure a free space of 2 m around the trampoline's diameter.
• The height of the clearance above the user has to at least amount to 1 m.
• The trampoline shall constantly be monitored for its suitability for use, for
example, with regard to the permissible wear and tear of the wearing parts.
Wearing parts are:
- Twin-Strings
- jumping mat including fastening clips with hooks
• The durability of the jumping mat and twin-strings is limited by the materials.
Their life span can be extended by storing the parts in a dark place. Replace
the twin-strings annually for optimal performance. For your safety replace
the jumping mat every 5 years.
All images are examples of the design.
Trampoline Sky, 110 cm ø
65424
11.1 kg
100 kg
• Be aware of the fact that a trampoline's connecting springs can generate
tremendous elasticity and propel the person on the mat to surprising heights
and cause the body to move in a variety of extreme and unusual directions.
Use the trampoline only if you are physically fit. In case of a doubt, consult a
doctor before using the product.
assemBly insTrucTions
1. Remove the preassembled jump element (1) from the packaging. The jump
element consists of jumping mat including fastening clips with hooks,
twin-strings and frame.
2. Remove the protective caps from the threaded connectors.
3. Put the rubber bases (3) on the supporting legs (2). (ill. 1)
4. Turn the legs (2) tightly on the threaded connectors (ill. 1).
5. Check the twin-strings occasionally and make sure that the supporting legs
are firmly in place (2).
MOUNTING OF THE HOLDING ROD:
There is a hole for attaching the lower holding rod (5), on one of the trampoline
frame footrests. You should as a first step remove the rubber stopper (3) from
the foothold (2) at this point. There is a sleeve with 3 grub screws, at the lower
end of the lower holding rod (5). Loosen the grub screws. Slip the sleeves over
the free foothold. Screw the lower holding rod (5) through the envisaged drill
hole to the frame. Proceed as illustrated in figure 3. Now tighten the 3 grub
screws firmly again. Insert the rubber feet (3) again onto the foothold (2). Loosen
the clamp (10) on the lower holding rod (5) and then insert the upper part of the
holding rod (4) in the lower part (5). The handle can be locked-in at 3 heights.
Select the desired height and ensure that the push button securely clicks into
place. Then tighten the screw of the clamp (10) firmly again.
seTTing THe susPension
The spring stiffness of the trampoline can be seamlessly adapted to the body
weight of the jumper or the desired training goal. There are mounting clips on
the jumping mat that are in each case provided with two hooks on both sides.
Different degrees of spring stiffness can be achieved depending on which of the
two hooks, one spans the individual twin-strings, on a given side. The closer
you attach the twin-strings on to the jumping mat, the stiffer you can set the
suspension. You can select for all twin-strings in each case, the first hook or
the second hook on a given side. You should however not mix the types of sus-
pension, in order not to provide for a large degree of variation in the burdening
of the twin-strings. Lead the twin-strings outgoing from a fastening clip to the
next fastening clip, with both in each case always either above or both below
the frame (Fig. 2).
mainTenance and sTorage
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and
after each use. Do not make any structural changes. For your own safety, please
use original spare parts only. These can be sourced from HUDORA. If parts
become damaged or if sharp edges or corners should develop, the product may
not be used any more. If in any doubt, please contact our service team (http://
www.hudora.de/). Store the product in a safe place where it is protected from
the elements, cannot be damaged, and cannot injure anyone.
disPosal adVice
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
serVice
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de.
4/8

Publicidad

loading