Additional Functions; Switching Off The Ir Receiver; Showing The Firmware Version; Specifications - IMG STAGELINE PARL-12RGBW Manual De Instrucciones

9

Additional Functions

9.1 Switching off the IR receiver

To protect the spotlight against inadvertent opera-
tion via the infrared remote control, switch off the
infrared receiver:
1) Call up the menu item
The display will indicate the current setting:
: IR reception switched on
: IR reception switched off
2) Use the button UP or DOWN to select the option
desired, and then press the button ENTER to
save your selection.
Note: Irrespective of this setting, infrared reception will
always be blocked during the DMX mode.

9.2 Showing the firmware version

To show the version number of the firmware (oper-
ating software of the unit):
1) Call up the menu item
sion number will appear on the display for a few
seconds. Then it will disappear again.
2) Use the control buttons to go back to the operat-
ing mode desired.
.
(version). The ver-

10 Specifications

Control protocol: . . . . . . . DMX 512
Number of
DMX channels: . . . . . . . . 1, 4, 5 or 8
Light source: . . . . . . . . . . 12 × 8 W RGBW LEDs
Beam angle: . . . . . . . . . . 25°
Ambient temperature: . . . 0 – 40 °C
Power supply: . . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . . 100 VA max.
Dimensions: . . . . . . . . . . . 265 × 190 × 130 mm
Weight: . . . . . . . . . . . . . . 2.1 kg
GB
17