Display Symbols And Their Indication - Jacob Jensen 80 Manual Del Usuario

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

3. Put the handset into the base unit, according to the picture shown below. Make

sure that the LED charge indicator on the base unit lights up to show charging is in

progress. The charging icon

also appears on the screen of the handset. While

charging, the bars in the icon scrolls and when the handset is fully charged, all the

bars of the battery will be filled.

important notice

•

To obtain the best battery performance, keep the handset being charged for

six hours after first time installation.

•

When the handset is removed from the base, the LED in the base will stay on

for approximately five seconds before it will fade out.

•

Remove the battery from this product if storing over 30 days.

A.2. setting language

After the initial charging of six hours you can start using your telephone. If you

would like to choose another language than the pre-set English, do as follows:

Press

and press

three times to select display

twice to select select lang. Press

language: english, deutsch, français, italiano, nederlands, español, dansk, svenska,

türkçe, norsk and press

A.3. replacement of battery

Depending on your usage, it is recommended to change the rechargeable battery

every year to achieve the best performance.

To replace the battery, follow the instructions below:

1. Prepare one rechargeable battery, 3.7V 650mAH Li-ion battery, part number

6000436.

. Gently remove the handset back cover, remove the old battery.

press

to select your desired

3. Observe polarity marks inside the battery compartment, and insert the rechargeable

battery. It is not possible to connect the battery with wrong polarity.

4. Replace the handset back gently; making sure the orientation of the battery

compartment cover is correct.