Buttons And Their Functions - Jacob Jensen 80 Manual Del Usuario

UK
symbol indication
Battery fully charged.
Battery half charged.
Empty and you hear a warning tone – the battery capacity is low and needs
charging. Remains steady when the line is in use.
Displayed when the ringer volume is set to OFF.
Phone book review mode. It shows when Phone Book records are being
viewed.
Flashes while connecting and receiving calls.
It shows that the phone's microphone is muted.
Message Waiting Indicator. Depending on your operator's service, this symbol
turns on when a voice message is left in your message box registered with the
telephone operator.
Hands-free speaker phone is on.
Keypad lock. It shows when the keypad is locked.
Intercom/internal call. It shows when intercom is in use.
A constant receiving power symbol shows good reception and transmission
power of radio signal.
36
c.

buttons And their functions

Before going through the following keypad functions, it is a good idea to understand
that multiple functions may be assigned to a single button in order to reduce buttons
cluster. On some buttons, short and long push on one button gives you different
functions in different modes. Pay attention to the following description regarding long
and short push. Short push means push and release immediately. Long push means
push and hold for approximately two seconds.
button in standby mode
on handset unit
Push this button to
access the menus.
To enter digit 0-9
This button functions
as when a
short push is given.
Long push toggles
"P" for pause.
To enter
This button switches
the handset keypad
lock on and off after
a long push.
in conversation mode in programming /
viewing mode
To enter: In programming
Mute, Internal call, mode, press this
Sound Enhancer, button to confirm a
Flash, Redial setting.
To enter digit 0-9 To enter digit 0-9 or
to enter alphabet
characters.
To enter
To enter