Reverting To Factory Default Setting - Jacob Jensen 80 Manual Del Usuario

Key Map:
Add. settings deregister
select Yes
1. Press to access the main menu.
. Press / to select "Add. Settings" and press
3. Press / to display "Deregister" press
4. Press / to select "Handset" or "Base" and press
5. Press / to select "Yes" and press
6. Press to exit and return to standby.
i.3. changing the Pin code
Key Map:
setting base base Pin
The default Base Pin code is 0000. If you want to change to a new PIN code, follow the
above procedures while you enter a new 4 digits base PIN code.
i.4. selecting a base
You can register the handset with up to 4 bases, e.g. one at work and one at home or
one upstairs and one in the garage, and switch between them. Once your handset is
registered with other bases, you can either specify the base you want to use or, select
"Automatic" for your handset to choose your base with the strongest signal.
Key Map:
Add. settings base select
base number
1. Press to access the main menu.
. Press / to select "Add. Settings" and press
3. Press / to select "Base Select" press
4. Press / to select "Automatic" or the Base Number. Press
confirm.
i.5. resetting your phone
If you reset your phone, both the base and the handset will return to their default
settings. The time, date, handset, and phonebook will not return to default.
select the handset or base
to confirm.
to confirm.
enter a new PIN code
Automatic or
to confirm.
to
If you have more than one handset registered to your base and you complete the
following procedure, only the handset you reset and the base will go back to the
default settings.
For the base
Key Map:
setting base base reset
1. Press to access the main menu.
. Press / to select "Setting Base" and press
3. Press / to display "Base Reset" press
4. Press / to select "Yes" and press
5. Press to exit and return to standby.
For the handset
Key Map:
Add. settings handset reset
1. Press to access the main menu.
. Press / to select "Add. Settings" and press
3. Press / to display "Handset Reset" press
4. Press / to select "Yes" and press
5. The display shows "Cleared" and returns to factory default.
J.

reVerting to fActorY defAult setting

You may change all settings in your DECT phone back to the factory default setting.
The only way to reset the handset or the base is to go into the menu and choose
"Handset Reset" or "Base Reset". Please refer to the above section i.5. resetting
your phone. All programming and settings you have made to the phone will be lost
automatically. It could be useful if you have programmed too many things at the same
time, making conflicts between your settings and affecting normal operation.
The following memory banks will remain unchanged after resetting to factory default:
- Caller ID memory
- Last Number Redial List
- Base unit and handsets registration
To change all settings back to factory default, go to section i.5. resetting your phone.
UK
select Yes
to confirm.
to confirm.
select Yes
to confirm.
to confirm.
45