Phone Book - Jacob Jensen 80 Manual Del Usuario

UK
f.

Phone book

There are 100 phone book memory banks built inside this DECT phone (13 characters
& 4 digits). You may store frequently used numbers into these memory banks.
If more than one handset comes with your product package (refer to information on
the package), the phone book memories are independent among the handsets. The
phone book memory will not be automatically transferred from one handset to the
others.
f.1. to make a new entry
Key Map:
Phone book
1. Use the alphanumeric buttons ( to 9) to enter a name for the record in the same
manner as you manage alphabet input from your mobile phone. Push
to confirm. Press to delete an incorrect letter.
If you enter a letter and the next letter is on the same button, press
the cursor to the right or wait three seconds for the cursor to move. To switch
between upper and lower case, press
. Use the numeric buttons to enter phone number (timed pause can be inserted inside
telephone number after connected to a PABX. Press and hold
shows P), push again to save the record. Press
letter.
3. Press to select a tone type and press
4. Press to select "Store" or "Back" and press
5. The phonebook entry is now stored. Press
f.2. to make a new entry from caller id memory and redial list
You may copy a number stored in the Caller ID memory and the Redial list to the
Phone Book. (Consult sections of Caller ID and Last Number Redial for more details)
1. When a desired number is shown while you are reviewing caller ID memory or redial
list, push once. "Save to Phb." is displayed. Press
the keypad and press to confirm.
If you enter a name that is already stored in the phonebook, you will be prompted
to enter another name.
. The number is displayed. To confirm and save the entry to the phone book, press
to confirm.
4
new entry <enter name>
.
to delete an incorrect
to confirm.
to confirm.
to return to standby model.
. Enter a name using
3. If necessary, you can edit the number using
enter new ones using the keypad.
4. Press /
5. When finished, push
6. Press to exit and return to standby mode.
To add/remove area code, please see section g.3. caller id number conversion.
f.3. to make a call from the Phone book memory
Key Map:
1. Use the alphanumeric keypad to enter the first letter of a desired name inside the
phone book. First record starting with the entered letter will be shown on the
again screen.
. Use /
to move 3. Push to make the call.
f.4. to delete the Phone book memory
Key Map:
until the display
1. Use /
. Push to confirm or press
deleting. You will be asked to confirm permanent deletion of phone book record.
To confirm, push
long beep will be heard.
f.5. to change the Phone book memory
Key Map:
to enter the correct letters
1. Use /
. Push to confirm.
3. You may use
to select a distinctive ring.
again to complete.
/ to select number
to start browsing until desired name is shown.
/ to select number
to scroll until the desired name is shown on the screen.
to go back to the menu screen without
again and the selected phone book record is deleted and a
/ to select number
to scroll until desired name is shown on the screen.
to delete letters of the name entry and make a correction.
to delete any incorrect digits and
erase entry Yes
edit Numeric keypad