Protec ECOMAX Manual De Instrucciones página 22

Maintenance / Disposal
2.31. Remove roller racks from the machine and remove dirt under flowing water using a soft rag or sponge
2.32. Remove risidual dirt particles from the tanks
2.33. Clean all toothed gear wheels, axles, bearings and rollers, check them for damage (replace if required)
2.34. Clean inlet plate using a soft rag
2.35. Align roller racks and re-insert them in machine
2.36. Fill machine with chemicals
2.37. Switch machine on
2.38. Feed cleaning film (approx. 4 pieces)
2.39. Check function as described under item 1.
3. Perform constancy tests based on the applicable national standards (e.g. IEC
61223-2-1 and DIN 6868-2).
Be sure to dipose properly of used machines.
Used machine contain valueable materials that should be recycled
and turned over for proper treatment. Please be sure to turn used
machines over to approved recycling centers.
24 ECOMAX
TM