Safety Instructions - Protec ECOMAX Manual De Instrucciones

Technical Specifications
Electrical connections:
Power consumption:
Weight (unit):
Dimensions (LxWxH):
Floor space required:

Safety Instructions

To ensure the safe operation of this processor, installation and use should always
conform to the instructions contained in this manual.
The developer and fixer chemicals used in the processor should be handled
according to the manufacturers instructions. In general: Undiluted chemicals are
caustic. For this reason, chemicals should be handled very carefully. Avoid con-
tact with skin, always wear protective clothing, gloves and glasses when handling
the chemicals - for example, when mixing and refilling. Also when taking the
racks out for cleaning or servicing. If chemicals have come in your eyes, rinse the
eyes immediately with cold, running water for approximately 15 minutes and con-
tact a medical doctor afterwards. Inhalation of chemicals can be dangerous to
your health and should be avoided. For this reason, always ensure that the room
in which the processor is installed is adequately ventilated.
Environmental regulations regarding the storage and disposal of waste chemi-
cals should be obtained from the local water authorities and complied with.
Before opening the unit, switch off the unit and unplug it from the electrical
socket. Service and repairs must be performed by trained service technicians
only. Use only manufacturer´s replacement parts.
ECOMAX
TM
Electrical specifications are indicated on the model
nameplate.
Type 1186-1-0000: 230 V±10%, 5.8 A, 50 Hz.
Type 1186-2-0000: 230 V±10%, 5,8 A, 60 Hz.
Gerät nach IEC 1010 (EN 61010, VDE 0411)
Überspannungskategorie II
Type 1186-3-0000: 110 / 120 V~ ±10%, 12 A, 60
Hz, Type 1186-6-0000 110 / 120 V~ ±10%, 12 A,
50 Hz unit conforms to UL 3101 and CSA 22.2-
1010
overvoltage category II
Operation: 0.12 kWh
Development: 0.9 kWh
Empty 26.5kg (58.3 lbs)
Filled 34 kg (74.8 lbs)
88x66x42 cm (34.7x26.4x17.0 '')
2
0.58 m (6.2 sqft)
11