Speed Variation Hose; Progressive Start And Delayed Stop - CycloVac Tradition Manual Del Propietário

Exclusive to Cyclo Vac, the Speed Variation hose allows the selection of 4 power
levels by the simple slide of a switch on the hose handle. The light emitting
diodes on the "Speed Variation" hose indicate the power level chosen. Flashing
diodes inform you that the time has come to empty the receptacle or clean the
fi lters. Refer to the maintenance suggestions module or the integrated system
monitor on the unit itself (see pages 23 and 24).
WARNING
The use of an "SV" hose with a vacuum unit
other than that of the Cyclo Vac DL "SV" series
will cause irreversible damage to your hose which
would not be covered by the warranty.

Progressive Start and Delayed Stop

Each DL model is equipped with a special module allowing for a smooth and
gradual start-up of the vacuum system, to prolong motor durability. It will also
come to a complete stop within a few seconds after it has been turned off, to
allow for the complete evacuation of dust from the hose.

Speed Variation Hose

Operating Instructions
(DL Series Only)
(DL Series Only)
19