Vacuum Will Not Start - CycloVac Tradition Manual Del Propietário

Troubleshooting
P
ROBLEM

Vacuum will not start

30
P
OSSIBLE CAUSE
The electrical power is
not connected properly
Low voltage wire not
connected properly
Faulty vacuum inlet
Unit circuit breaker is off
In-house circuit breaker
is off
Defective on/off hose
Troubleshooting
C
ORRECTIVE ACTION
Ensure that the
power cord is plugged
into a dedicated
grounded electrical
outlet, according to
specifi cations on pages
13 and 14.
Verify the low voltage
wires, make sure they are
properly inserted into the
low voltage inlet, as per
instructions on page 15.
Start the vacuum unit
from other inlets in your
home, to identify the
defective inlet.
Press the reset button
to reset the unit circuit
breaker. If unit restarts
and automatically shuts
off shortly after, contact
an authorized service
center.
Reset the circuit breaker
in your electrical panel.
Verify that your central
vacuum unit is connected
on a dedicated grounded
circuit (see pages 13
and 14).
Turn the hose ¼ turn in
the vacuum inlet. If unit
starts, have the vacuum
hose checked by a
certifi ed service center.