Using The Remote Control; Installing Batteries - Teac PD-H01 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the remote control

Precautions for use
Q
Misuse of batteries could cause them to rupture or leak, which might result in fire,
injury or the staining of nearby materials. Please read and observe the precautions
on page 5 carefully.
o When using the remote control, point it toward the remote control signal receiver on the main
unit from a distance of 5 m (16 ft) or less . Do not place obstacles between the main unit and the
remote control .
o The remote control might not work if the remote control signal receiver on the main unit is
exposed to sunlight or bright lights . In this case, try moving the main unit .
o Beware that use of this remote control could cause the unintentional operation of other devices
that can be controlled by infrared rays .

Installing batteries

Remove the cover on the back of the remote control, and insert 2 AAA batteries into the case, align-
ing them with the + and _ indications . Replace the cover .
When to replace batteries
If the distance required between the remote and main unit decreases or if the unit stops respond-
ing to the remote buttons, replace both batteries with new ones .
Dispose of the used batteries according to the instructions on them or requirements set by your
local municipality .
12
PD-H01_OM_EFS_vA_CS6.indb 12
13/01/25 17:06

Publicidad

Tabla de contenido
loading

Tabla de contenido