Mp3 And Wma; Remote Control Unit; Battery Installation; Precautions Concerning Batteries - Teac PD-H380 Manual Del Usuario

MP3 and WMA

< This unit can play MP3 and WMA files recorded on a CD-R, CD-RW
or USB storage device.
< File names of MP3 or WMA should be alphanumeric characters.
This unit cannot display symbols and full-size or double-byte
characters (such as Japanese, Chinese, etc.) correctly. Also, be
sure to use the file extension. (".mp3" for MP3 files, ".wma" for
WMA files.)
< MP3 files are mono or stereo MPEG-1 Audio Layer 3 format. This
unit can play MP3 files with a sampling frequency of 44.1 kHz or
48 kHz and a bit-rate of 320 kbps or less.
< This unit can play WMA files with a sampling frequency of 44.1
kHz and a bit-rate of 192 kbps or less.
< Audio encoded at 128 Kbps should sound close to regular audio
CD quality. Although this player will play lower bit-rate MP3
tracks, the sound quality deteriorates noticeably at lower bit-
rates.
Discs
< The disc must be finalized in order to play.
< The CD-ROM must be ISO 9660 compatible.
< When more than 255 files are recorded on the disc, the unit might
not be able to play it correctly.
USB
< This unit supports USB 1.1 FULL SPEED (12Mbps).
< This unit can play MP3 files recorded in various external USB
storage devices such as USB flash memory, MP3 player or HDD.
The HDD must be formatted FAT 16 or FAT 32, but not NTFS.
< When more than 2000 files are recorded on the USB memory, the
unit might not be able to play it correctly.
< This unit might not be able to play MP3 memory player via the
USB.

Remote Control Unit

The provided Remote Control Unit allows the unit to be operated
from a distance.
When operating the remote control unit, point it towards the
REMOTE SENSOR on the front panel of the unit.
< Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there are
any obstacles between the unit and the remote control.
< If the remote control unit is operated near other appliances which
generate infrared rays, or if other remote control devices using
infrared rays are used near the unit, it may operate incorrectly.
Conversely, the other appliances may operate incorrectly.

Battery Installation

1. Remove the battery compartment cover.
2. Insert two "AA" dry batteries. Make sure that the batteries
are inserted with their positive "+" and negative "_" poles
positioned correctly.
3. Close the cover.
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the batteries are exhausted. In this case
replace the batteries with new ones.

Precautions concerning batteries

< Be sure to insert the batteries with correct positive "+" and
negative "_" polarities.
< Use batteries of the same type. Never use different types of
batteries together.
< Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
< When the remote control unit is not to be used for a long time
(more than a month), remove the batteries from the remote
control unit to prevent them from leaking. If they leak, wipe
away the liquid inside the battery compartment and replace the
batteries with new ones.
< Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.