implants to consult their physician and the medical
implant manufacturer before operating this machine.
•
Release the power trigger after each working
operation to save battery power.
•
Don't force the product. It will do the job better and
with less likelihood of a risk of injury at the rate for
which it was designed.
•
If any foreign object is hit or if vibrations occur stop
the product immediately. Remove the battery from
the product and check that the product is not
damaged.
Personal protective equipment
WARNING: Read the warning instructions
that follow before you use the product.
•
Always use approved personal protective equipment
when you use the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the right
equipment.
•
Use a protective helmet where there is a risk of
falling objects.
•
Long term exposure to noise can result in damaged
hearing. In general, battery powered products are
relatively quiet but damage can result from a
combination of noise level and long usage.
recommends that operators use hearing protectors
when using products for a longer coherent time of a
day. Continual and regular users should have their
hearing checked regularly.
WARNING: Hearing protectors limit the
ability to hear sounds and warning
signals.
•
Use approved eye protection. If you use a visor, you
must also use approved protective goggles.
Approved protective goggles must comply with the
1511 - 002 - 22.07.2020
ANSI Z87.1 standard in the USAs or EN 166 in EU
countries.
•
Use gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
•
Use sturdy non-slip boots.
•
Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
•
Keep first aid equipment close at hand.
Cutting attachment
WARNING: Remove the battery and make
sure the cutting attachment stops completely
before you work on any part of the cutting
attachment.
WARNING: Only use the cutting attachment
with the guards we recommend, see
Accessories on page 19 .
7