Hitachi DH26PC Manual De Instrucciones E Instrucciones De Seguridad página 16

English
4. Demolishing operation (Hammering only)
○ Bull point (Round type) (SDS-plus shank)
Code No. 303046
○ Bull point (Square type) (SDS-plus shank)
Code No. 316656
5. Groove digging and edging (Hammering only)
○ Cold chisel (SDS-plus shank)
Code No. 316657
○ Cutter (SDS-plus shank)
Code No. 316658
6. Grooving (Hammering only)
Grooving chisel (SDS-plus shank)
Code No. 316659
7. Bolt placing operation with Chemical Anchor.
(Rotation + Hammering)
Standard socket (SDS-plus shank)
on the market ○ 1/2" (12.7 mm)
○ 3/4" (19 mm)
8. Drilling holes and driving screws (Rotation only)
○ Drill chuck, chuck adaptor and chuck wrench
Special screw
Code No. 981122
16
Chemical Anchor Adapter
(Code No.303044)
Chemical Anchor Adapter
(Code No. 303045)
Drill chuck (13VLRB–D)
(includes chuck wrench)
Code No. 321814
Chuck adaptor G
(SDS-plus shank)
Code No. 303623
9. Drilling holes (Rotation only)
Drill chuck (13VLD–D)
(includes chuck wrench)
Code No. 321813
Chuck wrench
○ 1/2" (13 mm) drill chuck ass'y (includes chuck wrench)
and chuck (for drilling into steel or wood).
10. Driving Screws (Rotation only)
Bit No.
Phillips Driver Bit
Bit No. Screw Size
1/8" – 3/16"
No.2
(3 – 5 mm)
1/4" – 5/16"
No.3
(6 – 8 mm)
11. Dust cup, Dust collector (B)
Dust cup
Code No. 971787
12. Rotary hammer grease
1.1 lbs (500 g) (in a plastic case) Code No. 335781
0.13 lbs (60 g) (in a tube) Code No. 335782
NOTE
Specifi cations are subject to change without any
obligation on the part of the HITACHI.
Chuck wrench
Chuck adaptor (D)
(SDS-plus shank)
Code No. 303624
Chuck adaptor (D)
(SDS-plus shank)
Code No. 303624
Length Code No.
31/32"
971511Z
(25 mm)
31/32"
971512Z
(25 mm)
Dust collector (B)
Code No. 306885