Technical Specifications - Polar Refrigeration DN492 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)
Troubleshooting
If your POLAR appliance develops a fault, please check the following table before making a call to the Helpline or
your POLAR retailer.
Fault
The appliance is not
working
The appliance is leaking
water
The appliance is
unusually loud

Technical Specifications

Model Voltage
DN492 230v 50Hz
DN493 230v 50Hz
DN494 230v 50Hz
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
The appliance is not properly leveled
The discharge outlet is blocked
Movement of water to the drain is
obstructed
The water container is damaged
Loose nut/screw
The appliance has not been installed in
a level or stable position
Power Current Capacity
770W 3.5A 3 x GN1/1
800W 4A 5 x GN1/1
1300W 6.5A 10 x GN1/1
Action
Check the unit is plugged in correctly
and switched on
Call POLAR agent or qualified
Technician
Replace the fuse
Check power supply
Call POLAR agent or qualified
Technician
Adjust the screw feet to level the
appliance (if applicable)
Clear the discharge outlet
Clear the floor of the appliance (if
applicable)
Call POLAR agent or qualified
Technician
Check and tighten all nuts and screws
Check installation position and
change if necessary
Dimensions Weight
H X W X D (mm)
925 x 800 x 815
995 x 800 x 815
1625 x 800 x 815
UK
(Kg)
104
116
185
11