Rear Panel; Headphone Sockets - Roland C-190 Manual Del Usuario

Ocultar thumbs Ver también para C-190:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 75
C-190 Portable Organ
Panel descriptions

Rear panel

A OUTPUT R, L/MONO sockets
The C-190 boasts an excellent internal stereo ampli-
fier and speaker system and so doesn't require an
external amplification. There may be times, however,
when you need to use the public address system of
the hall or church where you are performing – or you
may want to record the C-190's sound without back-
ground noises. In those cases, use these sockets.
B EXP/SUST socket
This is where you can connect an optional DP-2,
DP-6, or BOSS FS-5U footswitch that allows you to
hold the notes you are playing on the keyboard. The
sustain function is only available for the orchestral
sounds.
Alternatively, you can connect an optional Roland
EV-5 or FV-300L pedal to this socket that can be used
for setting the MANUAL II division's volume.
C MIDI sockets (PEDAL IN, IN, OUT)
Use these connectors for transmitting (OUT) and
receiving (IN) MIDI messages to/from other instru-
ments.

Headphone sockets

The C-190 features two headphone sockets, allowing two peo-
ple to listen through headphones simultaneously, which is use-
ful for lessons. Using headphones allows you to play without
bothering others around you, even at night. By connecting a
jack to one of these sockets, you switch off the C-190's speak-
ers.
For optimum sound quality, be sure to use optional Roland
RH-25, RH-50 or RH-200 headphones.
8
A
B
C
D E
The PEDAL IN socket allows you to connect an
optional Roland MIDI pedal unit (PK-5A, PK-25 or
PK-7) so as to play the bass section (called "PEDAL")
with your feet. If you connect a pedal unit here, the
PEDAL section becomes polyphonic.
D Cord hook
After connecting the adapter cable, wind it around
the cord hook to the right of the socket to prevent
accidental power disruptions.
E DC IN connector
This where you need to connect the supplied PSB-4U
adapter. If it is damaged or out of order, be sure to
replace it with the same PSB-4U model. Do not use
other adapters as these may damage your C-190
beyond repair.
F POWER SWITCH button
Press this button once to switch the C-190 on. Press
it again to switch the C-190 off.
F

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido