BRONDI PMR FX-100 TWIN Manual De Instrucciones página 17

Your handset can communicate on one of the 8 channels
available. For every channel it is possible to set even just one of
the 38 CTCSS codes: you will hear only the conversations of the
PMR 446 handsets tuned to the same channel and CTCSS code. All
other conversations will be fi ltered, If you choose 0 as your CTCSS
code, the CTCSS fi lter will be deactivated and you will only hear
the communications of the channel chosen.
NOTE: If another user on the same channel uses a PMR 446
without CTCSS codes or with the code deactivated, he
may listen to your transmissions, even though you cannot
listen to his.
1. Press the MENU button, the number of the channel on the
display will start fl ashing.
2. Press the + and – buttons to choose the channel (from 1 to 8).
3. Press the MENU button again, the number of the CTCSS code
will start fl ashing.
4. Press the + and – buttons to choose the code (from 0 to 38).
5. To return to stand-by, press and immediately release the PTT
communication button; the parameters set up to now will be
saved.
17