Using The Stopwatch - BRONDI PMR FX-100 TWIN Manual De Instrucciones

1. Press the MENU button 7 times. The second channel and the
CTCSS code will fl ash on the display.
2. Press the + or – buttons until "
3. Press the MENU button to confi rm and exit the mode.
ATTENTION:
The secondary channel must be different from the primary.
Therefore, when attempting to set a secondary channel which is
the same as the primary, the DCM function will be deactivated
(OF).

6.14 USING THE STOPWATCH

You can use the stopwatch to a hundredth of a second in the
following way:
1. Press the MENU button and hold it down for 3 seconds to enter
the stopwatch mode.
2. Press the + button once to start the stopwatch.
3. Press the + button once more to stop the stopwatch.
4. Press the - button to reset the stopwatch.
5. To exit the stopwatch mode, press the MENU button and hold it
down for 3 seconds.
OF
" appears on the display.
24