Locking The Chosen Channel; Scan Function: Channel Scanning - BRONDI PMR FX-100 TWIN Manual De Instrucciones

Press the - and MENU buttons at the same time to activate the
monitoring function; to deactivate it, press and immediately
release the MENU button. When the monitoring function is active,
the display remains illuminated for 5 seconds and the receiving
symbol appears.
NOTE: The monitoring function is automatically deactivated if the
PTT transmission button is pressed.

6.7 LOCKING THE CHOSEN CHANNEL

This function is useful to avoid accidentally changing the channel
and CTCSS code set.
LOCKING THE CHANNEL:
Press the button and hold it down for about 3 seconds, until
you hear a confi rming beep. The
display.
UNLOCKING THE CHANNEL:
Press the button and hold it down for about 3 seconds, until you
hear a confi rming beep. The
display.

6.8 SCAN FUNCTION: CHANNEL SCANNING

This function is particularly useful if the channel has been
accidentally changed by you or your contacts. This function allows
you to check the communications on all 8 channels to identify the
channel used by yours.
If your contacts have set a particular CTCSS code, the scan will
detect the voice and the channel used, but will not detect the
CTCSS code.
1. With the handset in stand-by, press and immediately release
the MENU and + buttons at the same time. The word
appear on the display and the channel number will change
quickly (from 0 to 8).
symbol will appear on the
symbol will disappear from the
20
SCAN
will