Adjusting the grinding
fi neness
The grinding fi neness level was optimally
adjusted prior to delivery. It is therefore
recommended to only adjust the grinding
fi neness after about 1 0 00 coffee
preparations (about 1 year).
The grinding fi neness can only be set
while the mill is running. Thus, the
grinding fi neness should be adjusted
directly after coffee dispensing starts.
If the coffee fl avour is not suffi ciently
intense, it is recommended to set a fi ner
grinding level.
Place the lever 14 in one of the three
positions (as viewed from the rear of the
appliance).
Lever position
Left
Middle
Right
BA_CI_042015.indd 31
BA_CI_042015.indd 31
Cleaning and maintenance
– Pull the power supply plug before
– Never immerse the appliance in
– Do not use a steam cleaner.
Daily cleaning
• Wipe the outside of the appliance with a
• Empty the drip tray.
• Empty the coffee grounds container.
Cleaning the brewing unit
It is recommended to clean the brewing
Grinding fi neness
unit once a week.
Fine
• Switch off the appliance and pull the
Medium
Coarse (factory
• Pull off the cover 13 to the right.
setting)
• Press and hold the button on the handle
• Turn the handle clockwise until the stop.
• Pull the brewing unit out of the appliance
• Rinse the brewing unit thoroughly on all
• Let the brewing unit drip dry.
• Remove coffee residues from the
• Insert the brewing unit back into the
• Insert the cover until it clicks in.
Warning!
cleaning.
water.
soft damp cloth and normal dishwashing
liquid.
power supply plug.
of the brewing unit (Image E).
by the handle.
sides with clear water. The area shown
in Image F (arrow) must be free of
coffee residues.
appliance.
appliance, press (and hold) the red
button (Image E) and turn the handle of
the brewing unit counterclockwise until
the stop.
31
20.04.2015 20:45:12
20.04.2015 20:45:12