Technical Information; Maintenance; Troubleshooting - Chauvet Professional C6 Manual Del Usuario

Technical Information

5. Technical Information

Maintenance

To maintain optimum performance and minimize wear, turn the C6 panels off when not actively
being used and completely disconnect from power. Keep the environment around them free of dust,
dirt, water, and extreme temperatures.
The C6 panels should be cleaned at least once a month. To prevent dust build-up from reducing
light output and overheating, follow these guidelines when cleaning the C6 panels:
1. Unplug the panel from power.
2. Wait until the panel is at room temperature.
3. Use a soft brush to remove dust collected on the external components.
4. Wipe the outside of the LED strips with a soft, lint-free cloth dampened with a solution of water
and detergent. Apply gentle pressure only.
5. Make sure all connections are thoroughly dry before reconnecting power and signal cables.
Always dry the external surfaces carefully after cleaning them.
Do not spin the cooling fans using compressed air because you could damage them.

Troubleshooting

Problem
All panel LEDs are blinking
LEDs on a specific panel are not on Power cable not seated properly
All LEDs do not light
Does not power up
(LED power indicator does not
light during "self-test")
C6 displays no images or spotted
images
Page 20 of 80
Cause
Contact failure
Input cables connected incorrectly
No power
Loose or damaged power cord
Faulty power connection inside the
C6
Faulty external power supply
Loose or damaged signal cable
Resolution
Fix the loose LEDs or try re-plugging
Reseat power cable
Find the incorrectly connected cables
and reconnect properly
Contact Chauvet for repair
Disconnect and reconnect the signal
cable, or replace the cable
C6 User Manual Rev. 2