Setup And Installation; Ac Power; Ac Plug - Chauvet Professional C6 Manual Del Usuario

Setup And Installation

3. Setup And Installation

AC Power

Each C6 panel has an auto-ranging power supply that works with an input voltage range of
100 to 240 VAC, 50/60 Hz. To determine the power requirements for C6, refer to the label affixed to
the product or
The listed rating indicates the maximum current draw during normal operation. For more
information,
www.chauvetprofessional.com.
·
Always connect this product to a properly grounded and protected circuit.
·
Never connect this product to a rheostat or dimmer.
·
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.

AC Plug

The included power input cord has a Neutrik® powerCON® connector on one end to connect to the
C6, and an Edison plug at the other end to connect to power. Each C6 panel comes with a Neutrik®
powerCON® power-linking cord to connect power between panels.
Use the table below as a reference when wiring a new plug.
Connection
AC Live
AC Neutral
AC Ground
Page 12 of 80
Technical Specifications.
download Sizing Circuit
Wire (U.S.)
Black
White
Green/Yellow
Breakers from the
Wire (Europe)
Brown
Blue
Green/Yellow
Chauvet website at
Screw Color
Yellow or Brass
Silver
Green
C6 User Manual Rev. 2