Operating Through Menus - Sony Trinitron PVM-14M2MDJ Instrucciones De Uso

Using On-Screen Menus

Operating through Menus

There are five buttons for menu operations on the front
panel of the monitor. To display the main menu, first press
MENU (EXIT). The buttons you can use appear at the
bottom of the menu screen.
Functions of the buttons
RGB/COMPONENT
B A B
RESET
BLUE UNDER OVER
ONLY SCAN SCAN
RESET
button
Button To select menu
item
MENU return to the
EXIT previous menu.
ENTER decide a selected
SELECT item.
> move the cursor (z)
+
upwards.
–
move the cursor (z)
downwards.
.
RESET
(The above items in white type correspond to the marks in
the menu.)
30
SPLIT
MENU
A
E X I T
SELECT
M
ENTER
Buttons for
menu
operations
To adjust selected
menu item
return to the previous
menu.
select an item.
increase selected
value.
decrease selected
value.
reset current
adjustment value to the
factory setting.
For PVM-14M2MDE/14M2MDA/20M2MDE/
20M2MDA:
For the first time when the monitor is turned on, the
LANGUAGE menu (!™) will appear on the screen.
So, select the language you want to use.
ENTER
1
Move the cursor (z) to the desired language by
pressing the ./– or >/+ button.
2
Press the MENU(EXIT) button.
Note
Unless you press the MENU(EXIT) button in the procedure
above, the LANGUAGE menu will always appear
whenever you turn on the monitor.
The Contents of Menu Items
The following sentences show the details of each menu
items.
[ ] indicates the factory setting position.
1 Main menu
Select an item and press the ENTER (SELECT) button
to go to the following menu.
2 STATUS menu
Shows the current settings.
3 COLOR TEMP SELECT menu
Select the color temperature from among D65, D56,
D93 and USER. USER is set to D65 in the factory
setting. You can adjust or change the color temperature
in USER mode (a measuring instrument is needed).
Note
The color temperature of the USER mode can be
adjusted in the range from 3200K to 10000K.
You can adjust the color temperature of the USER mode
in the USER COLOR TEMP ADJUST menu (!¢) of
the user service mode.
For the details, see USER COLOR TEMP ADJUST
menu (!¢) on page 31.
4 CAPTION VISION menu
This menu is provided only for PVM-20M2MDU/
14M2MDU.
The monitor can display the signal with Caption Vision.
To display it, select the caption type in this menu.
c c
MENU
[D65]
[OFF]