To Begin Playing; Using The Twintone™ Function; Selecting Voices - Schimmel TwinTone Pianos 5.01 Instrucciones Para El Uso

Chapter
2

To Begin Playing

Using the TwinTone™ Function
1
(For models equipped with a sostenuto pedal)
Pull the silencing lever towards
you until you hear a click and
feel the mechanism catch.
(For models not equipped with a sostenuto pedal)
Press the center pedal and slide
it to the left.
This prevents the hammers from actually striking
the strings.
2
Plug the headphones into the
PHONES jack.
You can use two sets of headphones
simultaneously.
3
Turn the power on.
The POWER lamp lights green.
When the AUTO OFF MODE switch on the
bottom of the control unit is set to OFF, the
PLAY/STOP lamp lights up for 2 seconds.
4
Adjust the volume with the
VOLUME knob.
Caution
• The sound is not output properly if you hold down the keyboard while turning the power on. Remove your hand from
the keyboard when turning the power on.
• The keying sound of the keyboard remains even though the TwinTone™ function is activated.
• To prevent damage to your hearing, refrain from raising the volume to excessive levels, and do not use the
headphones for extended periods of time.
• Do not pull the headphone cord or apply excessive force on the plug. This can damage the headphone and lead to
sound output malfunction.
8

Selecting Voices

When using the TwinTone™ function, you can use the internal voices of this unit to perform with voices other
than that of a piano.
Voice name Setting method
Piano (default setting) Hold down the A-1, A#-1, and B-1 keys and press C4.
Harpsichord Hold down the A-1, A#-1, and B-1 keys and press D4.
Vibraphone Hold down the A-1, A#-1, and B-1 keys and press E4.
Pipe organ Hold down the A-1, A#-1, and B-1 keys and press F4.
Celesta Hold down the A-1, A#-1, and B-1 keys and press G4.
Strings Hold down the A-1, A#-1, and B-1 keys and press A4.
Electric piano 1 Hold down the A-1, A#-1, and B-1 keys and press C#4.
Electric piano 2 Hold down the A-1, A#-1, and B-1 keys and press D#4.
Jazz organ Hold down the A-1, A#-1, and B-1 keys and press F#4.
Choir Hold down the A-1, A#-1, and B-1 keys and press G#4.
Note
• Select voices with the unit turned on.
• Turning the instrument off resets voice selection, which returns to piano the next time you turn the unit on.
• See "Preset Voice List" on page 26 for details on voices.
• You can also select two voices simultaneously for performance. See "Dual voice" on page 10.
Caution
• You can change voices while performing. This function is not available for songs that are being played back.
• For voices other than piano, the shift/soft pedal alters the voice variation rather than dampening the tone.
• For voices other than piano, the volume of the sound for the three lowest keys has been lowered intentionally.
A # -1
A-1 B-1 C4–A4
9