About This Documentation; Scope Of Documentation; Presentation Of Information; Safety Instructions - REXROTH Gabel 400 SET Manual De Instrucciones Mantenimiento

1 About This Documentation

1.1 Scope of documentation

This documentation applies to the following products:
• Fork 400 SET, CASE LIFTER
• Fork 600 SET, CASE LIFTER
This documentation is intended for installers, operators, service technicians, and
system owners.
This documentation contains important information on the safe and appropriate
assembly, transportation, commissioning, operation, use, maintenance, disassembly,
and simple troubleshooting of the product.

Read this documentation completely, especially chapter 2 "Notes on Safety" and
chapter 3 "General Notes on Equipment and Product Damage", before working
with the product.

1.2 Presentation of information

Uniform safety instructions, symbols, terms, and abbreviations have been used in
this documentation in order to ensure that you can get to work quickly and safely
with your product. They are discussed in more detail in the following sections.
1.2.1

Safety instructions

This documentation contains safety instructions in section 2.6 "Product-specifi c
safety instructions" and chapter 3 "General Notes on Equipment and Product
Damage" and before any actions or steps whenever there is a danger of personal
injury or damage to the equipment. The measures described to avoid these hazards
must be observed.
About This Documentation
3 842 358 712/2014-01, MPS, Bosch Rexroth AG
5/28