Maintenance; Spare Parts - REXROTH Gabel 400 SET Manual De Instrucciones Mantenimiento


Check the torque on the
attachment plate screws
every six months.

10 Maintenance

Moving device parts!
Danger of crushing body parts between the machine, peripherals, or fl oor.

Switch off the case lifter before performing any maintenance measures.

Make sure that the case lifter cannot be switched on again during this period
( disconnect the unit from the power supply and make sure it cannot be
plugged back in).

Maintenance work may only be performed by trained personnel.
10.1 Maintenance
The fork is maintenance-free.
10.1.1 Checking the fork weld seams

Perform a visual inspection of the fork weld seams after 5 years and then annually
or during regular maintenance.
10.1.2 Checking the torque on the screws
Fig. 11: Torque on the screws holding the attachment plate

10.2 Spare parts

For spare parts, see the MTparts spare parts list, 3 842 529 770.
WARNING
(4x)
SW6
M =22 Nm
D
3 842 358 712/2014-01, MPS, Bosch Rexroth AG
Maintenance 23/28
358 709-09