Symbols Used; Assembly - REXROTH Gabel 400 SET Manual De Instrucciones Mantenimiento

16/28

Assembly

Table 4: Symbols used
SW13
M = 20Nm
D
SW5
M = 8Nm
D
PZ2 PH3
Loctite 243 Loctite 601
ESD
1 2 3
A B C X
Bosch Rexroth AG, MPS, 3 842 358 712/2014-01

7.3 Symbols used

Wrench for hexagonal screw
SW = wrench size (WS) ... mm
M = required tightening torque ... Nm
D
Wrench for hex-socket screw
SW = wrench size (WS) ... mm
M = required tightening torque ... Nm
D
Screwdriver for recessed head screws
PZ ... = Pozidriv recessed head, size ...
PH ... = Phillips recessed head, size ...
Lubricate
Grease
Secure the screws with:
• Loctite 243: medium strength adhesive (detachable), www.loctite.de
• Loctite 601: high strength adhesive (permanent), www.loctite.de
The identifi ed parts are not required for the assembly situation described. Use the
parts in another application or dispose of them.
Suitable for ESD applications
Warning: dangerous electrical voltage
Unplug the device before opening
Sequence of assembly steps in the graphics.
The numbers correspond with the order of the assembly steps according to the
instructions in the accompanying text.
Designation of components in graphics.
The letters identify the components specifi ed in the instructions.
Detailed view from another direction of vision,
e.g. on the rear or the bottom of the product.