3M Secure Click P95 Instrucciones De Uso página 2

3
Secure Click Particulate Filter P95
™
This filter helps protect against certain airborne particles. Misuse may result in sickness or death. For correct use, consult supervisor
and User Instructions, or call 3M in U.S.A., 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.
Important
Before use, the wearer must read and understand these User Instructions and the User Instructions for the 3M™ Secure Click™ Cartridges D8000
Series to be used with these filters. These filters are NIOSH approved only for use with 3M™ Secure Click™ Facepieces. Keep these User Instructions
for reference.
Use For
- Certain solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances.
- Certain liquid or oil based particles from sprays that do not also emit harmful vapors.
- Certain metal fumes produced from welding, brazing, cutting and other operations involving heating of metals.
Do Not Use For
- Do not use for gases and vapors including those present in paint spraying operations, unless combined with approved chemical cartridges.
- Do not use for asbestos.
- Do not use for sandblasting.
- In the U.S., do not use when OSHA substance specific standards, such as those for arsenic, cadmium, lead in the construction industry, or
4,4'-methylenedianiline (MDA) specify other types of respiratory protection.
Biological Particles
These particulate filters can help reduce inhalation exposures to certain airborne biological particles (e.g. mold, Bacillus anthracis, avian influenza,
Mycobacterium tuberculosis, etc.) but cannot eliminate the risk of contracting infection, illness or disease. OSHA and other government agencies have
not established safe exposure limits for these contaminants.
Use Instructions
1. Failure to follow all instructions and limitations on the use of these filters and/or failure to wear the respirator during all times of exposure can
reduce respirator effectiveness and may result in sickness or death.
2. Before occupational use of this respirator, a written respiratory protection program must be implemented meeting all the local government
requirements. In the United States, employers must comply with OSHA 29 CFR 1910.134 which includes medical evaluation, training, and fit
testing. In the U.S., users must also comply with applicable OSHA substance specific standards. In Canada, CSA standard Z94.4 requirements must
be met and/or requirements of the applicable jurisdiction, as appropriate.
3. The airborne contaminants which can be dangerous to your health include those so small that you cannot see them.
4. Leave the contaminated area immediately and contact your supervisor if dizziness, irritation, or other distress occurs.
5. Store the filters and respirator away from contaminated areas when not in use.
6. Dispose of used product in accordance with applicable regulations.
Use Limitations
1. These filters do not supply oxygen. Do not use in atmospheres containing less than 19.5% oxygen.
2. Do not use when concentrations of contaminants:
- are immediately dangerous to life or health (IDLH),
- are unknown,
- are greater than 10 times the permissible exposure limit (PEL) with half facepiece respirators, or
- exceed specific OSHA standards or applicable government regulations, whichever is lower.
3. Do not alter, clean (e.g. vacuum, wash, use compressed air), abuse or misuse these filters.
4. Do not use with beards or other facial hair or other conditions that prevent a good seal between the face and the sealing surface of the respirator.
Time Use Limitations
1. If filters become damaged, soiled, or breathing becomes difficult, leave the contaminated area immediately and replace the filters.
2. If used in environments containing only oily aerosols, dispose of filters after 40 hours of use or 30 days, whichever is first.
W WARNING
1
(English)
User Instructions
D7P71