Kenwood KDC-BT73DAB Guia De Inicio Rapido página 18

Ocultar thumbs Ver también para KDC-BT73DAB:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 92
KDC-BT73DAB only
Installing the Digital radio antenna
• When installing the antenna on the
left side
Accessory
5
Earth sheet
Match the protrusion with 5
8
Remove the film covering the earth
sheet and paste the earth sheet on the
metal part of the vehicle.
Provide sufficient leeway for the earth
sheet so that it does not interfere with
the interior parts (front pillar cover).
Also take care that the interior parts do
not interfere with the amplifier.
Accessory
5
9
Wire the antenna cables.
• Use cord clamper (Accessory 6) to
secure the antenna to the pillar at
several locations.
18 | Quick Start Guide
Accessory
4
Front glass
Front pillar
Interior part
Earth sheet
<
• Take the following precautions when
passing the antenna cable inside the front
pillar where the air bag is installed.
- Install the amplifier part of the antenna
cable in front or above the air bag so
that the antenna and the air bag do not
interfere.
Accessory
5
- The front pillar cover is secured with
a special clip which may need to be
replaced when the front pillar cover is
removed.
Contact your vehicle dealer for details
on replacing the front pillar cover and
availability of replacement parts.
Interior part
Air bag
Front pillar
Clip

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kdc-bt53uKdc-5057sd

Tabla de contenido