Playing Music (Cd/Usb/Sd/Ipod); Playing A Disc - Kenwood KDC-BT73DAB Guia De Inicio Rapido

Playing music (CD/USB/SD/iPod)

Disc slot
[Control] knob
[SRC]
[ 1 / 6 ]
Release

Playing a disc

Open the Disc slot cover upward.
Insert a disc in the Disc slot.
When it is inserted, the source is
switched automatically and playback
starts.
Close the Disc slot cover.
Playing a USB device/ iPod
Connect a USB device or iPod to the USB
terminal as shown above.
When it is connected, the source is
switched automatically and playback
starts.
You can connect the iPod or USB device
to either one of the USB terminals
provided at the front and rear of this unit.
If you connect it to the rear USB terminal,
the "REAR USB" indicator stays lit.
o ptional accessories
[1]
6 | Quick Start Guide
Disc slot cover
[ E / F ] [ R / S ]
[ G ]
REAR USB indicator
Playing SD card
1
Press the Release button and detach the
Faceplate.
2
Hold the SD card as shown below and
insert it into the SD card slot until it
clicks.
SD card
(commercially available)
3
Reattaching the Faceplate.
4
Press [SRC] to select "SD" source.
Selecting an audio file folder
Press [R] or [S].
Selecting a song (track or file)
Press [E] or [F].
Fast-forwarding or fast-
backwarding a song (track or file)
Press and hold [E] or [F].
Pause and play a song (track or
file)
Press and hold [1/6].
CA-U1EX
[1]
KCA-iP102 [1]
USB Terminal
(KDC-5057SD only)