Triton TA235CSL Instrucciones De Funcionamiento Y Seguridad página 15

SYMPTOM
Heavy sparking occurs
inside motor housing
Retractable guard will
not close, or is slow
to close
If a problem cannot be resolved using the above advice do not tamper
with the saw - visit www.tritontools.com to find your nearest Triton office
for assistance.
** Visit www.tritontools.com to find your nearest authorised service centre.
WARRANTY
To register your warranty visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list
(unless indicated otherwise) for information
on future releases. Details provided will not
be made available to any third party.
PURCHASE RECORD
Date of Purchase:
TA235CSL
Model:
Serial Number: __________________
(Located on motor label)
Retain your receipt as proof of purchase
PROBLEM
Brushes not moving freely
Armature short circuited
or open circuited
Commutator surface not
clean
Return spring detached
or broken
Guard is bent
Mechanism fouled
by saw dust
___ / ___ / ____
SUGGESTED REMEDY
Disconnect power, remove
brushes, clean or replace
Use authorised service centre**
to repair or replace
Use authorised service centre**
to repair or replace
Re-attach or replace spring
(use only genuine Triton
replacement parts)
Straighten it or contact authorised
service centre** to repair or
replace
Clean and lightly lube fouled
mechanism
Triton Manufacturing & Design Co.
warrants to the purchaser of this product
that if any part proves to be defective
due to faulty materials or workmanship
within 12 MONTHS from the date of
original purchase, Triton will repair, or at
its discretion replace, the faulty part free
of charge.
This warranty does not apply to
commercial use nor does it extend to
normal wear and tear or damage as a
result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights
Troubleshooting/Warranty
GB
15