Eyelet - Singer 9985 Manual De Instrucciones

10.Fold the fabric and stitch along the seams on
each side, just a needle width from the original
stitching line. Remove the basting.
c. Wrong side of fabric
11. Fold the fabric along the buttonhole
end and stitch triangular ends on the original
stitching line.
12. Press and trim the patch to within 5 mm
(3/16") of the stitching.
a. Right side of fabric
c. Wrong side of fabric
NOTE:
When sewing lighter weight fabric, reinforce
buttonhole area. Cut a patch of fusible interfacing
3 cm (1 1/4") wider and 2 cm (3/4") longer than
the buttonhole. Fuse to wrong side over each
buttonhole marking.

EYELET

This stitch pattern is used for making belt holes
and other similar applications.
117 Eyelet
Satin Foot (B)
You can choose 3 sizes of eyelets by changing the
stitch length.
1. Place the fabric under the presser foot and
lower the presser foot. Start the machine.
Machine will sew the eyelet and stop
automatically.
2. Press the thread cutter button and raise the
presser foot.
3. Make a hole in the center of the eyelet.
Note:
Eyelet punch is not provided with this machine.
74