Inserting Paper; Connecting The Printer To The Device; Operation - Mettler Toledo BT-P42 Instrucciones De Manejo

Important
• Before operating, check all cables for damage.
• Guide the cables so that they cannot become damaged or interfere with the weigh-
ing process!
• Take care that the AC adapter cannot come into contact with liquids!
• The power plug must be always accessible.
2.3

Inserting paper

2.4

Connecting the printer to the device

1
3

Operation

• Pressing the printer key
• Pressing the balance key with the
As long as the balance does not show a stable weight value, nothing will be printed out.
• Feed paper through the slot in the printing unit in the direction
of the arrow.
• Switch on printer with toggle switch at the rear.
• Press and hold
• Position the printer within range of the balance.
Maximum distance: 10 m
• Connect the device in accordance with the Installation and
Operating instructions for the BT or BTS interface option.
As soon as the device to be connected has been set up for the
BT-P42, the printer is ready to operate. The connection may
take 10 to 20 seconds to establish.
The connection status is indicated by the blue Bluetooth lamp
(1):
– Lamp flashing:
– Lamp continuously lit up:
advances the paper 1 line (line feed).
symbol prints out the stable weight value.
until sufficient paper has been fed in.
No connection
Connection present
BT-P42 Printer 5