Powering On; Inserting Paper Roll - Mettler Toledo APR320 Manual De Usuario

3.2.2 Powering On

24 VDC
1 Connect the AC/DC power adapter to the power
socket on the back of the printer.
2 Lock the connector with the screw nut.
3 Connect the 3-pin grounded AC power cable to
the socket of the AC/DC power adapter.
4 Connect the printer to the mains.
5 Switch on the printer with the power button.

3.2.3 Inserting Paper Roll

1 Open the paper roll cover.
2 Take out the paper rotary axis.
Ticket Printer
1
100 - 240 VAC
1 The LCD shows the Language scree. Use
2 The LCD shows Paper Out. Install the paper roll
1
1 Insert the paper rotary axis into the paper roll.
2 Adjust the paper roll holder, if needed.
Note: The paper roll must unroll in the correct
direction (see picture).
Language
中文
English
METTLER TOLEDO
Paper Out
to choose the appropriate language, then press
to confirm.
according to [Inserting Paper Roll Page 9].
3"
2"
Installation and Configuration​ ​
2
2
/
2
9