Topstitching; Zipper Sewing; Fabric Preparation - Sears Kenmore 385.15516000 Manual De Instrucciones

Tabla de contenido

Publicidad

Topstitching
Stitch selector:
1 or 2
(_ Stitch length:
Red zone
@ Needle thread tension:
2 to 6
(_ Presser foot:
Zigzag foot
@ Presser foot:
Straight foot
NOTE:
When using the straight stitch foot, make sure to use
center needle position. Otherwise the needle may strike
the presser foot and possibly break.
Topstitching emphasizes lines of garments and keeps
seams and edges flat and crisp. Accent suits or blouses
with one or two rows of topstitching around the outer edges
of cuffs, lapels or collars. Lower the presser foot and keep
the edge of the fabric next to the right edge of the presser
foot.
Evenly guide the fabric along the edge to produce an even
row of topstitching 3/8" (1.0 cm) from the edge.
S
(#
i
i
PA ERN
®
LENGTH
@
or
ou
Zipper Sewing
(_ Stitch selector:
1
(_) Stitch length:
2
(_) Needle thread tension:
3 to 6
(_ Presser foot:
Zipper foot
S
LENGTH
• Fabric preparation
(_ Right side (Top side) of fabric
(_ End of opening
(_) Wrong side (Bottom side) of fabric
_) 3/4" (2.0 cm)
Place right sides (Top sides) of fabric together and sew to
the end of the zipper opening (_.
Reverse stitch to lock the stitches. Increase stitch length
to 4 and set needle thread tension at 0. Sew the zipper
opening with the basting stitch.
S
\
\
34

Publicidad

Tabla de contenido
loading

Tabla de contenido