Inserting Bobbin - Sears Kenmore 385.15516000 Manual De Instrucciones

• Inserting bobbin
[] Place a bobbin in the bobbin case making sure thread
feeds clockwise coming from the bobbin.
[] Draw the thread through the slot of case.
[]
S
[]
[] Continue to draw the thread under the tension spring
and through the opening.
Pull out about 4" (10 cm) of thread.
S
[]
[] Holding latch open, position the bobbin case into the
shuttle and release latch.
S
[]
[] Case should lock into place when latch is released.
[]
22