Installation; Power Supply; Installing The Camera; Camera Description - Abus TVIP10005B Manual De Instrucciones

3. Installation

Make sure that all accessories and parts listed above are present in the scope of delivery. An Ethernet cable
is required for camera operation. This Ethernet cable must meet UTP Category 5 (CAT 5) specifications and
must not be longer than 100 metres.

3.1 Power supply

Before starting installation, ensure that the mains voltage and the rated voltage on the power supply unit are
identical. The camera's supply voltage is 5 VDC. Please use the supplied power supply

3.2 Installing the camera

With the camera a mounting bracket is supplied. At the backside of the camera a socket is located. Using this
socket the camera mounting bracket can be fixed at the camera. The mounting bracket can be fixed at the
wall unsing the supplied pegs and screws.

4. Camera description

4.1 Description of connectors

Front side
1 Lens
2 Microphone
3 Status LED
4 Network connector
5 Power supply connector 5 VDC
6 WPS Status LED (only TVIP10055B)
1
2
3
a
7 WPS button (only TVIP10055B)
8 Reset button
9 Socket for camera bracket (1/4 inch
thread)
a Product sticker (with model number and
MAC address)
8
Back side
5
4
9
6
7
8