Black and Decker BEMW472ES Manual De Instrucciones página 8

English
Fig. B2
Fig. B3
Fitting the lower handle (Fig. C)
1. Insert the ends of the lower handle into the
corresponding holes in the mower.
2. Press the handle down as far as it will go.
3. Secure the handle using the screws.
Fig. C
6
Assembling the upper handle (Fig. D)
Fit the upper handle part to the lower handle using the
handle knobs , washers and screws as shown.
6
Fig. D
6
Securing the motor cable (Fig. E)
1. The motor cable has to be fixed using the cable restraint.
2. Snap a restraint clip 14 around the cable and lower
handle about 6 inches (152.4mm) below the handle
knob .
6
3. Snap a second restraint clip
upper handle about 6 inches (152.4mm) below the
pivot control 4 .
Fig. E
4
14
Fitting the grass catcher (Fig. F)
1. Lift the rear flap 13 and place the grass catcher
over the lugs.
Fig. F
13
around the cable and
14
6
14
10
10