Multiplex SMART SX FLEXX Manual De Instrucciones página 69

Page 68
Move the left vertical rocker switch to
3
centre position. (3-speed gearbox)
An acoustic signal indicates that centre
position has been assumed.
Start programming mode on the MFC-01 (see operating instructions for
4
Tamiya MFC-01).
Teaching the actuator:
5
Hold the actuators in the end positions for 2 seconds each.
(a) Left stick: forwards
(b) Left stick: backwards
(c) Left vertical rocker switch (gearbox):

press forwards and hold

press backwards and hold

return to the centre position by
briefly pressing the rocker switch
(An acoustic signal indicates that
centre position has been
assumed.)
Tamiya model trucks
SMART SX FLEXX