Technical Data - McCulloch M40-450C Manual De Instrucciones

EC-DECLARATION OF CONFORMITY (APPLIES TO EUROPE ONLY)
Husqvarna AB, SE-561 82 Huskvarna, Sverige, tel: +46-36-146500, declares under sole responsibility that the McCul-
loch lawn mowers with the model designations defined in chapter Technical Data from the serial numbers 00100001
and onwards comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data.
0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, has issued reports regarding the
assessment of conformity according to annex VI of the COUNCIL'S DIRECTIVE of May 8, 2000 "relating to the noise
emissions in the environment" 2000/14/EC.
Huskvarna 11/11/2010
Bengt Ahlund, Development manager
(Authorized representative for Husqvarna AB and responsible for technical documentation.)

TECHNICAL DATA

Cutting width
Measured Sound Power Level dB(A). (Note 2)
Guaranteed Sound Power Level dB(A). (Note 2
Sound Pressure Level @ operators ear dB(A). (Note 3)
Vibration level at the handle, m/s². (Note 4)
Net Power
Rpm
(See the last page for references)
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production model measured to
SAE standard J1349/ISO1585. Mass production engines may vary from this value. Actual power output for the engine installed on
the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power level (L
Note 3: Reported data for sound pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB(A).
Note 4: Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s².
6
ENGLISH -
1
Guaranteed Sound Power Level
2 Model
3
PNC - Part Number Code
4
Maintenance level
5
Serial number
6
Type
7
Weight
8 Engine
9
Nominal engine power
10
Engine speed
A
B
C
D
E
F
G
) in conformity with EC Directive 2000/14/EC.
WA
(Note 1)