Setting The Temperature - Dometic CFF Serie Instrucciones De Uso

Operation
✓ The display (fig. 3 4, page 10) switches on and shows the current temperature.
✓ The cooler starts cooling the interior.
9
I
NOTE – Displayed temperature
The temperature displayed is that of the large section of the interior
compartment (fig. 9 1).
I
NOTE
When operating from a battery, the display switches off automatically if
the battery voltage is low. The LED "P" flashes orange.
Latching the cooler lid
➤ Close the lid.
➤ Press the latch (fig. 2, page 9) down, until it latches in place audibly.
I
NOTE
When latching the lid, ensure that both latch side pins are fully engaged
to ensure a good lid seal. One latch may engage slightly before the
other.
➤ If the lid is not closed equally at both sides, press until a second click
is heard.
6.6

Setting the temperature

➤ Press the "SET" button (fig. 3 5, page 10) once.
18
1
CFF35, CFF45
EN