Wr2 Components; Wr2 Benefits; Mounting The Controller Interface - Rain Bird WR2-48 Manual Del Usuario

WR2 Components

A
Controller Interface
B
Sensor
C
Battery Cassette and Lithium CR2032
Battery
D
Sensor Mounting Bracket Assembly
E
Mounting Hardware
F
User's Manual
G
Quick Reference Guide
H
WR2-48 Quick Reference Label
2
4
b d
NOTE: Tools needed for installation:
drill, drill bit, and Phillip's head
screwdriver.
2
WR2-48 Wireless Sensor
1
3
5
6
8

WR2 Benefits

l d
All settings are programmed through the
Controller Interface device
l d
Large easy to understand icons communicate
irrigation mode and sensor status
l d
Sensor LED indicator enables one-person
setup, reducing installation time
l d
Battery is easy to install / replace
l d
Aesthetic appearance - no external
antennas
l d
Easy to install, self-levelling sensor bracket
mounts to flat surfaces or rain gutters
l d
"Quick Shut Off " interrupts active
irrigation cycle during a rain event
l d
Enhanced antenna array provides
superior signal reliability that overcomes
most line of sight obstructions
l d
Automatically prevents irrigation for
48-hours following a rainfall event (WR2-
48 model only).
Mounting the
Controller Interface
Choose a location near the irrigation
controller / timer.
CAUTION: The cable harness is 30
d d
inches (76.2 cm) long, so before
mounting the device, ensure the wires
easily reach the irrigation controller's
connection terminals.
l d
7
Select a flat surface
adjacent to the irrigation
controller.
l d
For best performance,
the Controller Interface
should be installed at
least five feet (1.5m)
above the ground.
l d
It is recommended that
the Controller Interface
be installed away from
sources of electrical interference (such
as transformers, generators, pumps, fans,
electrical meter boxes) and metal objects
to maximize communication range.
l d
Use the mounting hardware supplied.
Attach the Controller Interface to the wall.