Initial Power Up; Controller Interface Display Icons; Sensor Status; Environmental Conditions - Rain Bird WR2-48 Manual Del Usuario

Initial Power Up

After power is applied, the Controller
Interface displays the following icons.
Controller Interface Display
Icons

Sensor Status

Battery Life Remaining:
Four (4) dark bars indicate
full battery strength.
Replace battery when
only one (1) bar remains.
Signal Strength:
Illustrates strength of
the radio signal between
Sensor and Controller
Interface. Four (4) dark
bars indicate maximum
signal strength.
Sensor Indicator /
Pairing Status:
The Sensor and
Controller Interface
synchronize
communication
addresses. Battery Life
and Signal Strength will
flash while synchronizing,
and then stop when
paired.
4
WR2-48 Wireless Sensor

Environmental Conditions

Rainfall Set Point:
Select from six (6) set points
ranging from 1/8" (3mm) to
1/2" (13mm). A set point closer
to the top of the icon allows
for more precipitation to occur
before irrigation is suspended.
Rainfall Indicator:
Illustrates approximate
amount of rainfall relative to
Rainfall Set Point.
Rainfall Trip Indicator:
Displays when the Sensor has
suspended irrigation due to
"Quick Shut Off " or satisfying
rainfall set point.
Temperature Set Point
(Rain/Freeze Sensor only):
Select from three (3) set
points: 33°F (0.5°C), 37°F (3°C),
or 41°F (5°C). Selecting a lower
set point allows irrigation at
lower temperatures.
Temperature Indicator
(Rain/Freeze Sensor only):
Illustrates approximate
temperature relative to
Temperature Set Point.
Temperature Trip Indicator
(Rain/Freeze Sensor only):
Only displays when the Sensor
has suspended irrigation due
to temperature reading that
is below the temperature set
point.