Launch VALUE-200 Manual De Instrucciones página 10

<
AUTOMATIC PROCEDURE
ASSISTED PROCEDURE
NEXT MENU
Gas avail xxxxx g
Type in the vacuum time or confirm the previous value. To simply confirm, press ENTER. To
type in, use keys 0 to 9.
<VACUUM
AUTOMATIC OIL
OIL
FILLING
After vacuum time has been confirmed, the "Automatic Oil" message will flash. To confirm,
press ENTER
<VACUUM
AUTOMATIC OIL
OIL
FILLING
If "Automatic Oil" is confirmed, when the vacuum operation is completed the system will
automatically reintegrate with the same quantity of oil extracted during recovery.
VACUUM
<AUTOMATIC OIL>
OIL
FILLING
In order to reintegrate a quantity of oil different from that discharged following recovery, set as
follows. After confirmation of the vacuum time, "Automatic Oil" will begin to flash. Press the
down arrow (↓) key to move to "Oil xx cc," then use the keys 0 to 9 to type the volume of oil to
be automatically reintegrated after vacuum, and press ENTER
VACUUM
<AUTOMATIC OIL
OIL
FILLING
VACUUM
AUTOMATIC OIL
<OIL
FILLING
After "AUTOMATIC OIL" or the quantity of oil to be reintegrated has been confirmed, "Charging
xxxx g" will begin to flash.
Set the quantity of fluid to be reintegrated as follows:
INSTRUCTIONS MANUAL
>
xx min>
xx CC
xxxx g
20 min>
xx CC
xxxx g
20 min
xx CC
xxxx g
20 min
>
xx CC
xxxx g
20 min
30 CC>
xxxx g
VACUUM
AUTOMATIC OIL
OIL
FILLING
ENTER
<VACUUM
AUTOMATIC OIL
OIL
FILLING
2 0
VACUUM
<AUTOMATIC OIL>
OIL
FILLING
ENTER
VACUUM
AUTOMATIC OIL
<FILLING
ENTER
VACUUM
AUTOMATIC OIL
<OIL
FILLING
↓
30
VACUUM
OIL
<FILLING
ENTER
-10-
xx min
xx CC
xxxx g
20 min>
xx CC
xxxx g
20 min
xx CC
xxxx g
20 min
xxxx g>
20 min
xx CC>
xxxx g
20 min
30 CC
xxxx g
>