AirSep Focus Manual Del Paciente página 163

GB
1) Connecting Focus to AC electrical power:
When you are near an AC socket, you may choose to operate Focus with
the universal power supply rather than the battery. Connect the cord on the
power supply labelled as DC OUT to Focus into the Focus unit's power inlet,
as shown in Figure 7. Do not force the plug, as it should be inserted only one
way. From the other end of the power supply, connect the 3-pin AC cord
from the power supply into any standard socket.
DC OUT
to Focus
GB-11
Focus unit's
power inlet
Figure 7
®
AirSep
MN172-1 rev. - 03/11
Focus™
Corporation