Specifications
Superstructure
Boom
12,6 m – 39,0 m, four-section, sequenced synchronized full
power boom.
Maximum tip height: 41,9 m.
* Bifold swingaway extension
10,0 m - 17,1 m offsettable bifold lattice swingaway extension.
Offsets 0°, 20° and 40°. Stows alongside base boom section.
Maximum tip height: 58,6 m.
* Boom extension inserts
Insert
2 x 6,1 m lattice extension inserts. Installs between the boom nose
and bifold extension, non-stowable. Maximum tip height: 70,6 m.
Boom elevation
One double acting hydraulic cylinder with integral holding valve
provides elevation from -3° to +78°.
Load moment and anti-two block system
Standard "Graphic Display" load moment and anti-two block
system with audio-visual warning and control lever lockout. These
systems provide electronic display of boom angle, length, radius,
tip height, relative load moment, maximum permissible load,
load indication and warning of impending two-block condition.
The standard Work Area Definition System allows the operator to
pre-select and define safe working areas. If the crane approaches
the pre-set limits, audio-visual warnings aid the operator in
avoiding job-site obstructions.
4
Cab
20° tilt, Full-vision, all-steel fabricated with acoustical lining and
tinted safety glass throughout. Deluxe seat incorporates single-axis
hydraulic controllers. Tilt/telescoping steering wheel with various
controls incorporated into the steering column. Other standard
features include:, hot water heater, cab circulating air fan, sliding
side and rear windows, sliding skylight with electric wiper and
sunscreen, electric windshield wash/wipe, fire extinguisher, seat
belt, air conditioning, and dual cab mounted work light.
Slewing
Two speed, planetary swing drive with foot applied multi-disc wet
brake. Spring applied, hydraulically released swing brake. Single
position mechanical house lock, operated from cab. Maximum
speed: 2,0 RPM.
Counterweight
8 165 kg. Hydraulically installed and removed.
Hoist
Planetary reduction with automatic spring applied multi-disc wet
brake. Electronic hoist drum rotation indicators, and hoist drum
cable followers.
Maximum Single Line Pull:
1st layer: 9 185 kg
3rd layer: 7 716 kg
5th layer: 6 650 kg
Maximum Permissible Line Pull:
7 620 kg with 6X37 class rope.
7 620 kg. with 35X7 Rotation Resistant rope.
Maximum Single Line Speed: 156 m/min
Rope Construction: 6X36 EIPS IWRC, Special Flexible
35x7 Rotation Resistant
Rope Diameter: 19mm
Rope Length: Main Hoist: 183 m - Auxiliary Hoist: 183 m
Maximum Rope Stowage: 256 m