Mood Light; Sleep Function; Switching The Radio On/Off - Beurer WL 75 Instrucciones De Uso

8.4 Mood light

The Wake-up light can also be used as a mood light.
NOTE: If you switch on the mood light via the Wake-up Light, you get a mood light with a standardized color
change. If you set the mood light via the 'beurer LightUp' app, you also have the following setting options.
- Mood light color
- 10 preset sequences (e.g. rainbow)
- Timer
To activate the mood light:
1. Press and hold the On/Off button for 2 seconds. The color changing mood light comes on.
2. To maintain one color on the mood light, press the On/Off button again.
3. To switch the mood light off, press the On/Off button again.

8.5 Sleep Function

The Sleep function is ideal for helping you fall asleep. Here you can set the sunset function. With this
function, the light gradually dims over time. You can also assign various relaxing sounds to the simulated
sunset and either use natural light or a mood light.
NOTE: You can set the sunset function using the 'beurer LightUp' app or the buttons on the Wake-up Light.
To switch on the sunset function:
1. To use the sunset function with normal light, briefly press the On/Off button. The light comes on.
To use the sunset function with the mood light, press and hold the On/Off button for two seconds. The
mood light comes on.
2. Press and hold the On/Off button for 5 seconds. 02 flashes on the display. Use the
five seconds to set sunset duration.
3. Use the / buttons to set the volume.
4. Use the Set button to set the desired sound.
8.6 Radio
NOTE: You can configure the radio settings using the 'beurer LightUp' app or the buttons on the Wake-up Light.
Setting the radio station
To set the radio station using the buttons on the Wake-up light, proceed as follows:
1. Press the Set button on the device twice. 'SET Radio' appears on the display. Wait three seconds until
the current station frequency flashes on the display.
2. Use the / buttons to set the desired radio station. To start the station search, press and hold the
or button. Confirm with the Set button.
3. Program number P 01 flashes on the display. Use the
number (e.g. P 01 or P 02) under which the set radio station is to be saved. There are 10 radio memory spaces
available. Confirm with the Set button.

Switching the radio On/Off

1. To switch the radio on or off, press the Radio button on the Wake-up light.
2. To select a station preset, press the Set button and then press the
station preset.
3. To set the volume, press the / buttons during radio playback.
7
/ buttons to select the desired program
/ buttons to select a radio
/ buttons within