Appliance Safety; Vibration Load - AL-KO Energy Flex LBV 4090 Manual De Instrucciones

GB
parts can cause serious inju-
ries.
■
Keep the appliance out of the
reach of children.
■
Switch off the appliance be-
fore crossing gravel paths.
■
Do not lay the appliance down
on gravel whilst switched on.

3.1.3 Appliance safety

■
Only use the appliance under
the following conditions:
■
The appliance is not dirty,
especially not with petrol
and oil.
■
The appliance show no
signs of damage, especial-
ly the protective grille.
■
All controls function proper-
ly.
■
All accessory parts intend-
ed for the respective oper-
ating mode are fitted on the
appliance.
■
Do not overload the machine.
It is intended for light work in
the private sphere. Overload
can lead to damage to the ap-
pliance.
■
Do not vacuum up any
branches, pieces of glass,
sharp objects, pieces of met-
al, stones or other objects.
They will damage the shred-
ding blade and the rotor.
34
■
Never block the vacuum and
ventilation grille during opera-
tion in order to avoid any
overheating of the motor.
■
Immediately switch off the ap-
pliance if the motor begins to
vibrate abnormally or strongly.
There is an appliance fault in
this case.
■
Never operate the appliance
with worn or defective parts.
Always replace defective
parts with original spare parts
from the manufacturer. If the
appliance is operated with
worn or defective parts, guar-
antee claims against the man-
ufacturer are excluded.

3.2 Vibration load

■
Danger due to vibration
The actual magnitude of the
vibration emissions during the
use of the appliance may de-
viate from that stated by the
manufacturer. Observe the
following influencing factors
before or during use:
■
Is the appliance being used
as intended?
■
Is the material being cut or
processed in the proper
manner?
■
Is the appliance in a proper
condition of use?
Safety instructions