Adding A New Entry To The Cameras Directory; Adding A New Entry To The Actuators Directory; Adding A New Entry To The Cctv Cameras Directory - Comelit 1454 Manual De Uso

Adding a new entry to the Cameras directory

` Click to access the Cameras directory.
1. Click (button [B] in the figure on page 28).
2. In the "name" field, enter the name identifying the entry in the directory.
3. In the "address" field, enter the ViP address you wish to associate with that entry.
4. Select the desired camera.
to save the new entry in the directory / click
5. Click

Adding a new entry to the Actuators directory

` Click to access the Actuators directory.
1. Click (button [B] in the figure on page 28).
2. In the "name" field, enter the name identifying the entry in the directory.
3. In the "address" field, enter the ViP address you wish to associate with that entry.
4. Select the position of the relay you want to activate.
5. Select the relay you wish to activate.
6. Click to save the new entry in the directory / click

Adding a new entry to the CCTV Cameras directory

` Click
1. Click (button [B] in the figure on page 28).
2. In the "Name" field, enter the name identifying the camera in the directory.
3. In the "Address" field, enter the RTSP address of the IP camera.
The RTSP address must be composed as follows:
rtsp:// IP address of the camera
• Example RTSP address for Comelit IP CAM 100 cameras
• Example RTSP address for Comelit IP CAM 700 cameras
to access the CCTV Cameras directory.
rtsp://192.168.1.200:8001/ch01_sub.264
rtsp://192.168.1.200:554/1/stream2
to cancel the new entry.
to cancel the new entry.
port name of the channel
29